|
|
本帖最后由 安规浩子 于 2013-8-16 17:21 编辑 $ P1 \7 t; c! X4 _
jsspace 发表于 2013-8-16 17:07  / I4 \* f. h2 t0 k: z
不满足EN60598.1 第8.2.1章节：basic insulated parts shall not be used the outer surface of the lumi ...
Y- t( q: A3 b6 F( |6 d1 }
单凭这条判failed不严谨吧。
* J/ c8 w* y+ x0 _+ t
* z" E5 G3 ?( H+ h( }8 P$ B我认为关键在这个cover的结构上。2 `) c, b) r% G9 }6 D
Protection against electric shock shall be maintained for all methods and positions of
. }. W0 i1 e3 s, n0 ninstallation in normal use with regard to the limitations indicated in the manufacturer's% k: ]9 }8 \8 L% T$ V1 T
installation instructions, and for all adjustments of adjustable luminaires. Protection shall be
% |) W0 n6 N$ h+ Mmaintained after removal of all parts which can be removed by hand, except lamps and the
1 s4 @. k+ o q" |, a/ Bfollowing parts of the lampholders:, X2 {% V5 x' [5 n7 Z
2 a6 X. b2 h1 u5 Z3 j
Covers in fixed luminaires that cannot be removed by a single action with one hand are not
* w6 `0 a6 n5 R8 `removed. However, covers which have to be removed for changing lamps or starters are" D. I" O) A5 F1 ?3 q2 s7 g- q
removed for this test.% F5 O/ A9 e5 }/ g1 ~% Z* C
7 u) R, t# ^) \0 B3 N7 `+ f所以如果能单手单动作能去除我认为不符合，否则对于你图片上的样品，就第八章来说我认为是可以接受的。
" d7 F" _! N/ |0 a& y& \
5 n) w( Y7 [2 W8 g+ j( B8.2.1那段只讲了要有合适的保护才能允许基本绝缘露在产品外部，但怎样算是合适的保护，这里没有细讲。所以应该看后文。
9 U$ s* \3 A& Y另外，如果是8.2.6里面提及的wall mounted luminaires, portable luminaires, and adjustable luminaires，还需要考虑20N或者80N的拉力测试。如果不是则只考虑单手单动作是否拆开就可以了（标准另外提及的例外情况除外）。, t5 S3 G4 Y6 i! R2 M
|
评分
-
查看全部评分
|
[复制链接]
/1 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2013-8-15 16:42
显身卡
楼主